Exam Prep class Testimonials
Student Testimonials
Feed back from attendees who took the classes & then took the test
After taking your class and much study...at the end of the test, the lady printed out the report and it said YOU PASS your Wyoming Master Electrician Test! Thank you.
Steven Ransom, Ft. Laramie, WY
I wanted to let you know that I passed my NE Master Exam with a high score!!
Wayne Sherrill, Belmont, NC
Thanks for the classes! I got my Masters!
--Don Adams, Ft. Dodge, Iowa
Just wanted to let you know I passed my contractors test. Thanks for all your help and great review classes.
--Jeff Gilbert, Huron SD
Your class and materials were very helpful to me in passing the Electrical Contractor Exam. The helpful hints that you put out during the course on making notes in your code book are a must.
--Marv Harp, Rapid City SD
I just wanted to let you know that I passed my Wyoming Master Electrician exam. Thank you for a great class. I don't think I would have had the same success if it weren't for attending your 5-day class. It was worth every penny. Thanks again. I have already recommended your class to others.
--Brian Gailey, Grand Junction, CO
After our company went through some major changes in late 2010, we found ourselves without a licensed master electrician in many of the states we had previously worked in. As a licensed master electrician and electrical contractor in Iowa, I took Steve's class as a fast track to getting our licensing back in other states. Two weeks after completing his comprehsive class, I have taken and successfully passed the WY Journeyman exam, SD and NE electrical contractors exams and have a couple more of the surrounding states' exams on the schedule. I highly recommend this class to everyone!
--Bradford (Woody) Little, DesMoines, IA
I took your Master Exam prep course in May for WY and I passed the exam on June 7th. Your course was excellent. Without it, the exam would have been very difficult to pass. Thank you!!
--Tim Mitchell, Casper, WY
I took the week long class in October in preparation for the Wyoming Master exam; got home and was extremely busy but took the exam 4/9/11 and passed with no issues. I will recommend Steve's classes to everyone!
--William Nolan, Brighton, CO
I just wanted to let you know that I passed my master/contractor exam on the first try!! There is no doubt in my mind that by attending your seminar I got the mental tools I needed to get the job done. I will definitely come to your seminars for continuing education and I will do my best to let everyone know that you're the guy to go to when it comes to electrical knowledge. Thanks again!
--Luke Nord
Just a line to let you know that I passed my Wy. Master's test on the first rtry. There is no doubt in my mind that your course was a major contributor to my passing the test. Thanks again for all of your help, hope to see you at a future continuing education class.
Ken Bartle, Powell, WY
Just a note to tell you I passed the Master's Exam. I found I didn't know all the answers, but after your class, knew how and where to find the answers. I really appreciate your help and I'll definitely be attending your code classes in the future!
--Blair Belnap, Evanston, WY
I just wanted to let you know that I took my Wyoming Masters test last week and passed on the first try. I took your Master's preparation course in July. There is no doubt that your class helped me to pass. I found your class was an excellent refresher course and will definitely recommend it to others. Thanks.
--Dave Molder, Gillette, WY
I took your 5-day Exam Prep course in November, 2009 and I wanted to let you know I passed the Contractors test.
--Martin Brosnahan, Lead, SD
I took your 5-day Exam Prep course in October, 2009 and I wanted to let you know I passed the Wyoming Master Exam. Thanks for all your help!
--Michael Parich, New Iberia, LA
I took your Master's Exam Prep course in December, 2009 and I wanted to let you know that I passed my WY master exam on the first try. Your course was excellent and helped me a lot. Thank you and I will see you in a future class.
--Brad Bartlett, Rawlins, WY
I took your contractor prep class and passed with no problem. I was totally prepared after attending your three day class. I hope to see you again real soon. This is the class to attend and get totally prepared for the exam and pass. Just can't say enough good things about it.
--Ray Juhnke, Marshall, MN
I took the class in February, 2009. Took the SD Journeyman test in April, Passed with an 82%. I was very happy with the class. The way the material was presented made it easy to take notes, which help a lot in reviewing the information.
--Bob Johnson, Louisburg, MN
NEC Code Calculations class
January 11-12, 2012
Steve instructors in easy to understand terms. Great group discussion.
--Blaine Schaefer, Bowman, ND
November 7-11, 2011
You gave me the tools; now it's up to me to follow through, thanks.
--Bruce Stroklund, Minot, ND
August 31 & September 1, 2011
I am sure that the knowledge I learned will help me pass my Master's Exam.
Brian Steffen, Mitchell, SD
July 13 & 14, 2011
This class was very helpful in learning the layout of the Codebook and calculations. Course helped in how to find the different tables and when to round up or down.
--Dirk Mack, Scranton, ND
Understanding the 2008 NEC
May 2 & 3, 2011
I've been attending Steve's classes for 15 years or so. In fact, after my first seminar with Steve I've never been to any other. He is a true professional with all the latest technology in class delivery. Being an associate with Mike Holt speaks volumes. Thank you, Steve.
--Jeremy Brunette, Gillette WY
December 6 & 7, 2010
It was refreshing to have someone extremely knowledgeable of code teach me on understanding the NEC "lingo". When I have a need for more CEU, I will call you first.
--Daniel Garland, Rapid City, SD
November 1 & 2, 2010
Steve is awesome in his knowledge of the code!
Bill Haley--Newcastle, WY
September 13 & 14, 2010
Steve did a great job. He took time to answer questions and discuss items not understood. I will be back for the 2011 code changes.
--Len Heimann, Gillette, WY
July 26 & 27, 2010
I think this is a better quality code class than I've attended before. I appreciated that time was spent dealing with code situations and I liked the use of visual aids.
--Randy Hein, Rapid City, SD
June 7 & 8, 2010
As hard as it is to make Code interestnig, Steve did a good job.
--Rick Cruz, Cheyenne, WY
May 10 & 11, 2010
Steve is very knowledgeable about the code changes. He gave good explanation on all subjects.
--Vic Sizemore, Cody, WY
Steve does a wonderful job and I would recommend his classes to anyone. I especially liked reviewing the code book and talking about real life experiences.
--Adam Thole, Gillette, WY
April 8 & 9, 2010
I always pick up smaller details on every area.
--Bob Baker, Rapid City, SD
March 1 & 2, 2010
This is a great class. The instructor has great knowledge of the subject, is responsive to questions and is able to present ideas/concepts clearly. The classroom also worked very well.
--Jim Barker, Lusk, WY
January 4 & 5, 2010
Going through the code and doing examples helps during test time and can't hurt to get us to help make our worksite safer
--Jerry Bottger, Rapid City, SD
December 7 & 8, 2009
Steve made sure we knew the changes in the code.
--David Wells, Brandon, SD
There were good visuals and discussion. Steve aswers all questions thoroughly.
--Jeff Leonard, Spearfish, SD
November 2 & 3, 2009
I received good information from each topic discussed. This is a very good course to take.
--Martin Brosnahan, Lead, SD
--This course really helped to break down the code book.
--Jason Fischer
The lecture were top notch, and discussions and questions were resolved well.
--Bryan Watts, Sheridan, WY
October 5 & 6, 2009
This is an excellent class with an excellent facility. I have really benefited from this class. It is a good resfresher.
--Benny Gambrel, Gillette, WY
This is a very interesting and informative class. I feel I have learned a great deal.
--Joseph Scott, Wheatland, WY
August 31 & September 1, 2009
Steve Arne is very knowledgeable about the code and you will have a good understanding of the code after the class.
--Jesse Glasgow, Casper, WY
A lot of material was covered in the 2 days. It was money well spent.
--Casper Rasmussen, Wright, WY
July 13 & 14, 2009
This was an excellent way to review the code book and get updates on code changes in a way that is easy to understand.
--Don Bear, Belle Fourche, SD
I recommend this class to any apprentice that will be taking the Journeyman's test
--Todd Schimke, Huron, SD
2011 NEC CODE CALCULATIONS FOR EXAM PREP & MASTER'S COMMERCIAL CALCULATIONS
June 6-10, 2011
Thank you again for such a wonderful class. The 5-day class was time well spent. I always enjoy learning from someone who really understands the material and delivers it so well. I look forward to fulfilling my next continuing education requirements with you again.
--Brian Gailey, Fruita, CO
This class was great for getting hands-on experience with calculations and seeing the tables being used. Class was very informative and Steve is a really good instructor who is He is good at relaying the concepts.
--Garth Johnson, Dickinson, ND
June 8-10, 2011
This class helped me to learn how to keep all of the steps in order when doing commercial cacluations. I like that it is in a small setting and you can always get an answer to a question.
--Jeff Gilbert, Huron, SD
2008 NEC Code Calculations for Exam Prep
May 2-6, 2011
I felt like Steve has "been there" with invaluable experience. I liked the in-depth presentations, getting to the basics and the knowledge and experience of the group.
--Jeremy Cox, Basin WY
After attending week-long seminar, I am comfortable about testing with the knowledge I received.
--Michael Jacobs, Rawlins WY
March 16 & 17, 2011
Steve was very helpful and willing to answer questions. Seminar was very informative and Steve really breaks down the calculations/table use.
--Cody Rowan, Riverton, WY
February 16 & 17, 2011
Steve, keep up the great work. Your seminars help everyone learn more. You answer all questions with a great deal of knowledge.
--Leonard Ferguson II, Kyle, SD
December 8 & 9, 2010
What a great instructor! Steve really cares about students' understanding the material.
--Sean Cannon, Rapid City, SD
November 3 & 4, 2010
This classed exceeded my expectations!
--Patrick Simonson, Dickinson, ND
September 15 & 16, 2010
This was a very informative class; a great review of the code. Steve is very fluent and knowledgeable in the subject matter.
--Larry McClure, Volga, SD
July 28 & 29, 2010
I appreciated Steve taking the time to make sure we understand the material. Steve is very knowledgeable and willing to help with calculations and answer questions.
--Arlen Jorgenson, Pipestone, MN
June 9 & 10, 2010
Dwelling calculations was the most important thing I learned in class as well as it being the most difficult concept to grasp. I especially liked the group activitiy. I will be back in 2 years.
--Byron Garbers, Pipestone, MN
March 3 & 4, 2010
The material covered and Steve's knowledge of the material were very helpful. He did a great job and I really enjoyed the class.
--Dave Yearout, Douglas, WY
December 9 & 10, 2009
All aspects of class were extremely beneficial. I will definitely recommend this class to others; whether they are preparing to take the exam or just as a refresher.
--Chad Engstrom, Rawlins, WY
The discussion was the most beneficial to me. I will definitely be sending others.
--David Wells, Brandon, SD
November 4 & 5, 2009
The breakdown of the math questions and the step-by-step walk throughs were very helpful.
--Jason Fischer, Bowman, ND
October 7 & 8, 2009
This class is most definitely worth the investment of time and money.
--Patrick Bolter, Brandon, SD
I would highly recommend this course. It really helped with the code book layout and how to use it.
--Ben Simonds, Rapid City, SD
September 2 & 3, 2009
This is a good class to take in helping to understand what you have been missing.
--Joe Emmett, Pwell, WY
July 15 & 16, 2009
This is a good class to take for preparation for any exam.
--Todd Schimke, Huron, SD
Master's Commercial Calculations
December 10, 2010
This class explained some of the code areas that I have had problems understanding. Steve is a great instructor. I especially liked the hands-on with the calculations.
Troy Fethkenher, Worland, WY
This is probably one of the best classes for CEU that I've attended.
--Richard A. Pieper, Lansdale, PA
September 17, 2010
I liked the relaxed atmosphere. The class was very well laid out.
--Ken Bartle, Powell, WY
The amound of information presented in a relatively short amount of time was very worthwhile.
--Brett Kwasniewski, Webster, SD
July 30, 2010
Steve is able to explain code in an understandable way. It was very helpful to go through the steps in doing the calculations.
--Dave Molder, Gillette, Wy
June 11, 2010
Commercial calculations was the most important as well as the most difficult concept I learned. Steve goes to great lengths to explain concepts and to answer questions.
--Bill Reed, Gillette, WY
March 5, 2010
Steve is a great instructor who went through topics thorougly and did a good job of explaining concepts. I especially liked that he gave step by step instructions on how to figure out the calculations
--Joe VanRuler, Brandon, SD
December 11, 2009
Doing the commercial calculations in class was very beneficial. The discussion, worksheets and lectures were all excellent.
--Jason Parson, Gillette, WY
November 6, 2009
The classes are all good. I receive worthwhile information from each one I attended.
--Martin Brosnahan, Lead, SD
October 9, 2009
This class really helped refresh some things I had forgotten. It was an easy format to follow.
--Mike Miller, North Liberty, IA
July 17, 2009
Steve takes time to answer questions and gives personal assistance to anyone needing help with the calculations.
--Darwin Eagle Elk, Porcupine, SD
The lectures, worksheets and examples are a big help as they hit all the ways to learn the material.
--Todd Schimke, Huron, SD
June 12, 2009
Working on multi-family dwelling calculations and other calculations were a great help as well as the discussion group and worksheets. The class is well worth the time and money
--Brian Larson, Summerset, SD
2008 NEC Code Calculations for Exam Prep
June 10 & 11, 2009
This class helps makes the complicated simple
--Casey Harriet, Buffalo, WY
This class is well worth the money as a refresher before taking the test.
--Ryan Thomas, Gettysburg, SD
Understanding the 2008 NEC
June 8 & 9, 2009
It was a relaxed atmosphere, made for a pleasant class.
--Gary Jacobson, Whitewood, Sd 57793
Master's Commercial Calculations
May 15, 2009
I would tell people who asked to take the course; it is well worth it.
Blair Belnap, Evanston, WY
2008 NEC Code Calculations for Exam Prep
May 13 & 14, 2009
There is a lot of information covered that is important if you are going to be taking a exam.
--Paul Balderramos, Rapid City, SD
I feel more and more confident everyday.
--Larry Kindle, Ft. Pierre, SD
Steve is well prepared and knows his "stuff".
--Blair Belnap, Evanston, WY
Understanding The 2008 NEC
May 11 & 12, 2009
Great Job, Steve! I enjoyed the class participation and presentation.
--Blair Belnap, Evanston, WY
It was a very informative course, instructor was very knowledgeable and experienced.
--William Wever
Master's Commercial Calculatins
April 10, 2009
The best course you can take to enhance your career
--Stanley Mosher, Cheyenne, WY
2008 NEC Code Calculations for Exam Prep
April 8 & 9, 2009
I appreciated the time you spent on extra questions...that was great!
--Roger Bonsell
Steve's courses are the best offered. Taking this course is one of the best investments an electrian can make, well worth the cost and time invested
--Stan Mosher, Cheyenne, WY
There was time in class to learn how to do calculations.
--Rex Rogers, Madison, SD
If you think you know enough to take a test; take one of these courses first and see how much you really didn't know.
--Chris Zimbelman, Rawlins, WY
Understanding the 2008 NEC
April 6 & 7, 2009
Steve knows his information and is able to put it in layman's terms
--Charlie Johnson, Belle Fourche, SD
This is the third class I've taken and it won't be the last.
--Kendall Robinson, Pierre, SD
We need more classes like this around the state.
--Mike Wensel, Burbank, SD
2008 NEC Master's Commercial Calculations class
February 6, 2009
I would highly recommend this class before taking the test
--Gary Ticknor, Powell, WY
2008 NEC National Electrical Code Calculations for Exam Prep classes
February 4 & 5, 2009
Thanks for providing your course "as advertised"
--Jason DeRoy, Gary, SD
The way the material was covered and explained made it real easy to follow along
--Robert Johnson, Louisburg, MN
I passed my Master's test first time
--David Morterud, Box Elder, SD
Understanding the 2008 NEC
February 2 & 3, 2009
This is a much better class that most code classes
--Anthony Wells, Rock Springs, WY
2008 NEC Master's Commercial Calculations class
January 9th, 2009
Very good class
--Doug Kudrna, Dickinson, ND
2008 NEC National Electrical Code Calculations for Exam Prep classes
January 7 & 8, 2009
Best class I have been to. Steve is very easy to understand and gives very good instruction.
--Donald Case, Baton Rouge LA
Class is well worth the money. Steve is a great instructor.
--Anthony Fulciniti, Moorcroft, Wy
After taking this Exam Prep, I will definitely take classes sponsored by Arne ElectroTech for code update.
--Derrick Fulciniti, Moorcroft, Wy
December 4 & 5, 2008
Definitely worth the time. Instructor is very easy to follow and he understood the material.
--Mike Staiger, Dickinson, ND
Steve puts on the best classes that I've been to. I would highly recommend to anyone; apprentice to master to take these classes. Steve breaks down the material so everyone can understand.
--Jim Baker, Lusk, WY
November 7 & 8, 2008
Great atmosphere, good instructor.
--Leopold Klatka, Rock Springs, WY
Great class, great instructor, accommodations were great. Would recommend to anyone.
--Greg Tennant, Rock Springs, WY
October 9 & 10, 2008
This course is very thorough and well worth the investment of time and effort. Any class time here would enhance your job skills.
--John Frantz, Casper, WY
This class helps to understand the calculations better; doing the calculations in class and being able to ask questions and make sure you are doing them right helps greatly.
--John Nikodym, Belle Fourche, SD
2008 Master Commercial Calculations class
October 11, 2008
If you want to pass your test, go to Arne ElectroTech Seminars
Les Chapman, Idaho Falls, ID
Definitely take the course if you are even slightly rusty on calculations and the references to find them in the code.
--John Frantz, Casper, WY
Sept 11& 12, 2008
This is an excellent course for anyone taking an exam
--Charles Smith, Lead SD
This is one of the best, if not the best, course for exam prep
--Christropher Jundt, Rapid City SD
Aug 14 & 15, 2008
Great class and thank you! I feel better about taking my exam now
--Kelly Graft, Casper, WY
Class was very informative. Exam Prep book will be a good study guide.
--DelRay Dorale, Dell Rapids, SD
Steven took the 2005 NEC Exam Preparation class July 13 & 14, 2007
I have taken my Electrical Contractor test in Nebraska and received a 96% on the test. Thanks to you and your company for the help in preparing for this important advance in my career. I studied the study book and it helped very much. Once again, thank you for providing a good learning class for the trade.
--Steven Ranson, Ft. Laramie Wy
Previous Attendee:
Don Brigham attended the March 27 & 28 Exam Prep class and the March 29th Advanced Master Exam Prep class. Don says "I would like you to know that I passed my test and I would recommend your clases to anyone."
2008 NEC Master's Commercial Calculations Class
July 19, 2008
Thanks, Steve, for offering such a good informational class.
--Travis Christianson, Savage, MT 59262
Steve is extremely knowledgeable in all topics
--Brett Galbraith, Rapid City, SD
2008 NEC National Electrical Code Calculations for Exam Prep classes
July 17 & 18, 2008
I would recommend this class to anyone who is preparing to take an electrical exam. The material covered was great. The information will be very useful in preparing for the exam and for doing my job.
--Travis Chr8istianson, Savage, MT
Steve hasn excellent knowledge of all material...no matte what questions were asked.
--Brett Galbraith, Rapid City, SD
Steve did a great job. I learned more in 16 hours with Steve than I did in two years of college.
--Lucas Nord, Brookings, SD 57006
mapI think I took more out of these 16 hours than I have in the 4 years I've done with correspondence courses.
--Anthony Roth, Buffalo, WY
2005 NEC National Electrical Code Calculations for Exam Prep classes
June 20 & 21, 2008, Rapid City, SD
Good Job...I feel better about taking the Wyoming test now.
--David Shane Kissel, San Antonio, TX
A good refresher course; Steve makes the class interesting.
--Robtin Tuttle, Kyle, SD
May 1 & 2, 2008 Rapid City, SD
This class will get you on track to pass a test
--Steve Reger, Fargo, ND
Instructor's explanations helped me undersatnd the reasons why we calculate things the way we do. Great job!! Made things simple to understand.
--George Davis, Godley, TX
April 3 & 4, 2008 Rapid City, SD
It is a very good way to brush up on the code.
--Cory Drake, Rapid City, SD
Class is very informative, a great review to prepare for the exam
--Jeff Gilbert, Hitchcock, SD
2008 NEC Master's Commercial Calculations Class
March 29, 2008 Rapid City, SD
Awesome learning and understanding techniques. Great coverage in a short time frame of calculations.
--Doug Stewart, Casper, WY
March 27 & 28, 2008 Rapid City, SD
This is an awesome class
--Doug Stewart, Casper, WY
February 14 & 15, 2008 Rapid City, SD
This is a great class, it help a lot on my Journeyman Exam
--Barrot Lillebo, Kennebec, SD
I've enjoyed the class thoroughly and I feel confident with more studying in this book, I'll be able to pass my test the first time.
--Phillip Murray, Casper, WY
December 20 & 21, 2007 Rapid City, SD
This is a well planned, interesting seminar with plenty of information. I'll be back!
--Blair Belnap, Evanston, WY
This is a great seminar for more in-depth explanation and discussion on difficult topics
--Ralph Leavitt, Casper, WY
November 9 & 10, 2007 Rapid City, SD
I wanted to let you know that I passed the test today (11/19), and I believe that your class was a major help. It really brought the loose ends together for me and boosted my confidence.
--George O. Smith, Buffalo, WY
November 9 & 10, 2007 Rapid City, SD
You always make everyone feel at home. It is well worth the money.
--Robert Myers
I particularly appreciate the approach. No one here was disregarded or left behind. I would tell anyone to take this class as it is a very usefull learning experience. Steve is on topic, concise and definitely knows what he's talking about.
--George Smith
June 8-9, 2007, Sioux Falls, SD
Very informative class. Steve covered topics very well.
--Dave Nase, Armour, SD
Very good information and lots of material to study.
--Jeff Runi, Sioux Falls, SD
March 30-31, 2007, Rapid City, SD
I like the way the class is informational to everyone i.e.- apprentices, journeymen, masters and engineers.
--Thad Stoddard, Beulah, WY
Very well done - will plan on attending your seminar in next code cycle
--Gene Strom, Ft. Collins, CO
March 9-10, 2007, Casper, WY
It is well worth the investment. We often forget a number of things pertaiing to the NEC and this class helped me to hone my understanding of may things that laid dormant for years.
--Thomas Kontz, Buffalo, Wy
January 26-27, 2007, Rapid City, SD
This class is a very good review. I learned a lot more than I thought I would. Book is a good study guide.
--tony Beshara, Rapid City, SD
The time goes by very fast. I will be attending more seminars that you provide. Thank you!
--Marlin Fineran, Kyle, SD
July 7-8, 2006 Rapid City, SD
I tell people to take this course if they need to learn about the code and pass their test. Steve is a great teacher.
-- Ron Healy, Rapid City, SD
*******************************
May 26-27, 2006 Rapid City, SD
This class was very well taught and is a tremendous help in passing the Journeyman's exam.
-- Kenneth Keith, Pine Ridge, SD
*********************************
April 7-8, 2006, Cheyenne, WY
I appreciate you taking the time to teach the calculations class in Cheyenne. Perry and I were grateful to pass the Journeyman test on the first attempt. The information you shared was essential to many of the questions that we asked. Keep up your good work!!
-- Preston Barlow, Cheyenne, WY
************************************
The environment was a great learning environment. Steve breaks down calculations and makes them easy to remember. This class was well put together. I will recommend this class to everyone.
-- Brad Bishop, Jackson, WY
I have taken classes other than Arne ElctroTech and they do not compare.
-- Kevin Taylor, Douglas, WY
**********************************
Example were laid out well and then followed up with good worksheets.
-- Eugene "Butch" Gosselin, Etna, WY
**********************************
I have enjoyed Steve's teaching method in a variety of classes. His approach to the material is from a technical standpoint not from a theoretical standpoint.
-- Chris Hill, Denver, CO
**********************************
March 10-11, 2006, Sioux Falls, SD
The lectures and topics discussed were exactly what I was looking for! I will strongly recommend this course to every apprentice I know.
-- Greg Clawson, Sioux Falls, SD
This class is definitely worthwhile! It's allot easier seeing someone explain it than trying to grasp it out of a book. South Dakota is lucky to have something like this.
-- Adam Rinas, Fargo, ND
*********************************
January 6-7, 2006, Rapid City, SD
I always enjoy seeing Steve and come away with plenty. Mike Holt's material is very informative and the best part is his open love for the Lord Jesus
-- Tony Randolph, Box Elder, SD
The class really helped me understand the problem areas in which I needed help.
-- William Reed, Gillette, WY
***********************************
December 9-10, 2005, Rapid City, SD
The slides and the workbook were very helpful in the class. As an AE, all the items covered were very helpful in helping me know what to study for to pass the JM test. As always I will recommend your class to others.
-- Paul Weber, Rapid City, SD
The materials were covered very well. It was presented in a manner that was easy to understand.
-- Ty Gripp, Buffalo, WY
************************************
November 4-5, 2005, Rapid City, SD
I have attended three of Steve's classes and have enjoyed every one of them. They have kept me interested through the whole duration of the class.
-- Jess Studt, Custer, SD
I would highly recommend this class, especially to apprentices. I will definitely come back and recommend to others.
-- Casey Harriet, Buffalo, WY
************************************
2002 NEC National Electrical Code Calculations for Exam Prep classes
July 22-23, 2005, Rapid City, SD
I would recommend the course to anybody weak in the areas of whole house calculations--this seems to be most common in this area.
-- Travis Swift, Rapid City, SD
I would recommend this class to all electricians for tests and updates on codes. The class was well organized and kept moving with ample breaks and good video presentation. Steve is very well qualified and does an outstanding job.
--Donald Willuweit, Deadwood, SD
******************************
June 2-3, 2005, Cheyenne, WY
The class was very informative. It covers allot of areas that aren't used every day in the trade, but will be on the electrical exam.
-- Wayne Andersen, Pinedale, WY
I learned things that I'm sure I missed on my test when I took it. The class was long.....but I wish it could have been longer. I really got allot out of it.
-- Josef Merlin McCulloch, Pinedale, WY
*******************************
April 22-23, 2005, Rapid City, SD
This class is wonderful! I learned more in 1/2 day than I did in four years of apprenticeship classes. Money well spent!!
-- Kenneth Hampton, Edgerton, WY
*********************************
March 11-12, 2005, Sioux Falls, SD
Things were brought up that I would never have thought of. Discussion groups, worksheets and lectures were all used. I would tell others "you couldn't ask for more help."
-- Dave Marsh, Florence, SD
The seminar gave me a direction to go--as far as study topics.
-- Roch Watson, Flandreau, SD
**********************************
February 3-4-5, 2005, Rapid City, SD
The class moved quickly and kept up our interest. The combination of discussion, worksheets and lecture worked together for a good rounded seminar.
-- Ed Hoffman, Gillette, WY
This seminar was well worth the time an expense.
-- Doug Christensen, Rapid City, SD
****************************************
December 2-3, 2004, Cheyenne, WY
This is a good class for learning and understanding the NEC course. Steve knows the material and explains it well.
-- Weston David, Pavillion, WY
The instructor is knowledgeable about "real world" situations and will relate them to worksheet questions.
-- Steve Hattermann, Evansonville, WY
************************************
November 12-13, 2004, Rapid City, SD
The class is very educational and informative. It offers a wealth of knowledge that can only make you a better and more professional electrician. I wish the class lasted 2 weeks; The invaluable things we learn from the NC are much needed.
-- Kenneth Keith, Pine Ridge, SD
**************************************
September 10-11, 2004, Rapid City, SD
Steve always takes the time to explain concepts and doesn't make a person feel stupid if they don't understand right away. I would always recommend your classes
-- Dee Myers, Hartford, SD
I found the course informative and educational. I would recommend this course to anyone who needs it.
-- Jesse Shine, Lead, SD
**************************************
August 5-6, 2004, Cheyenne, WY
This is the best code or update seminar I have attended. It will well worth the time and money. After viewing the quality of the transformer video, I will probably get the set.
-- Anthony David Knezovich, Rock Springs, WY
The class clearly spells out the needed steps to make it less complicated than most make it out to be.
-- Josh Querry, Jackson, WY
**************************************
July 9-10, 2004, Rapid City, SD
I would tell anyone interested to take this class. "you'll learn allot on the calculations which helps make some sense of the codebook
-- Mike Nichols, Rapid City, SD
I would tell any one interested to take the class, it is worth every penny. I got a 64% before the class on my test and an 88% after taking the class.
-- Greg Morford, Rapid City, SD
************************************
May 7-8, 2004 Sioux Falls, SD
This course is good for exam prep, for every day work and for testing.
-- Sage Gray, Laurel, NE
I would recommend this class to anyone who needs help or brushing up on calculations and how to find them in the codebook.
-- Matt Rand, Mobridge, SD
This class was a good experience and will be helpful in passing an electrical exam.
-- Caleb Martinmaas, Sioux Falls, SD
If formulas and calculations are giving you trouble, this is the best class you can take.
-- Josh Rowenhorst, Lennox, SD
*************************************
I would recommend this class no matter what type of license you hold.
-- Jeff Fritz, Brandon, SD
This course is great!!! It is a good refresher before you take the test.
-- Scott Warren, Casper, WY
***************************************
April 1-2, 2004, Gillette, WY
Steve is a good instructor; he gives a balanced class and doesn't leave people behind. It is a good class for the experienced electrician to review the code, but it also helps less experienced people learn it for the first time.
-- Lorn Mac Ilravie Gillette, WY
Steve's classes are very informative and he makes it very easy to learn.
-- Holly J. Stone, Belle Fourche, SD
******************************************
March 12-13, 2004, Rapid City, SD
This class helped allot to get ready for the Journeyman Exam.
-- Terry Kafka, Rapid City, SD
I will return for more classes
-- Rick Salyers, Black Hawk, SD
*******************************************
January 9-10, 2004, Rapid City, SD
A very professionally presented class. I highly recommend these high quality classes.
-- Rory Holmes
Steve was really responsible for me passing my Journeyman test!!!
-- Perry Wegner
**********************************************
Exam Prep Class Recent Attendee Passes Exam.
I wanted to take a few minutes to thank you for having the calculation seminar in Cheyenne Wyo. on the 5th and 6th of August (2004). It was a great asset for me I tested on the 7th for my Wyoming Masters. Although I do not know what my official test score is yet I do know by phone with the State that I passed.
They will not give the score by phone but the person I talked with said that I did exceptionally well on the test. I had tested in June and missed by 2 points.
I feel that thanks to dedicated people like yourself and Mike Holt I now have a new future. I have the paper work coming for my Wyoming Contractors license. I should be in Business by the end of the month. Once again thanks for my newly gained independence.
Dave Knezovich
Rock Spring, WY
Congratulations Dave, and best of luck on the new business. I really love to hear the success stories of our class attendees!
September 13-14, 2003 Rapid City, SD
******************************
I feel 100% ready to take the Journeymen test. This seminar gave me the confidence and removed allot of the self-doubt I've had.
Regina Cox, Cheyenne, WY
****************************
June 13- 14, 2003 Sioux Falls, SD
******************************
Very informative and well worth it. This course cleared up a lot of questions I was having problems with.
--- Matt Johnson, Corsica SD
Great prep class. Gets your head on straight before exam time and gets you into the code book again.
--- David Quiett, Gettysburg, SD
Good course, I recommend it
-- Terry Halvorson, Rapid City, SD
Steve goes at an understandable pace. Very good
-- Jon Manitz, Sioux Falls, SD
You do a great job and help me to realize what I need to study more of
-- Jason Nordman, Sioux Falls, SD
I feel that Steve is teaching and not putting anyone down for what they do not know. Steve has a good personality and attitude for teaching
-- Bill Kappler, Alpena, SD
Well explained, easy to follow. Well worth it
-- Mark Roemen, Larchwood, IA
Definitely worth it. I feel a lot more comfortable taking my Journeyman test now. Very good seminar.
--Adam Rinas, Sisseton, SD
Everything was covered well- it will help on the test.
-- Ross Frederickson, Sioux Falls, SD
******************************
May 10 - 11, 2003 Rapid City, SD
Take the class if you need to prepare for ANY exam.
-- Brad Burdette, Black Hawk, SD
Take this course, by all means. A great seminar for anyone in electrical field to attend.
-- Gary McGee, Rapid City, SD
Take the course- Thanks Steve
--Severin Boe, Pierre, SD
Well worth going to, very helpful class.
-- Mark Brodrick, Rapid City, SD
Everything that was "touched on" was explained very well and helped to understand how to use the code in every area. What would I say to others about this course? Do it! Won't be disappointed.
-- Robert Shade, Evansville, WY
Take the course. Great class.
-- Randy Gates, Casper, WY
******************************
April 12-13, 2003 Rapid City, SD
Just being in a group and with someone who knows what he is talking about helped allot.
-- Wayne Helland, Yankton, SD
********************************
February 8- 9, 2003 Rapid City, SD
Class was excellent. I learned allot in a short amount of time
-- Tom Yellow Boy, Porcupine, SD
*********************************
December 14-15, 2002, Rapid City, SD
I wasn't sure if I needed to come to the class, but I'm glad that I did. I feel very confident that I can pass my test.
-- Ryan Swanson, Rapid City, SD
*************************************
June 2-3, 2002, Sioux Falls, SD
I think the class was very good for someone taking the contractor or master test because there are not allot of calculations on the Journeyman test. It was a very good review of things I would not have studied on my own.
-- Josh Warkentin, Linn Grove, IA
It was worth the trip
-- Schaun Brodie, Auburn, WA
**************************************
May 4-5, 2002, Rapid City, SD
I would tell anyone to sign up for this seminar because it will help. It helped me fill in the blanks where I got confused by reading the code book.
-- Todd Schimke, Gettysburg, SD
***************************************
February 23-24, 2002, Rapid City, SD
Thanks allot, Steve. As the electrical field expands and advances, these classes are becoming more important all the time.
-- Donald Wanek, Reeder, ND
***********************************************
January 19-20, 2002, Rapid City, SD
This class is terrific! Your knowledge and ability to teach the NEC amazes me. I will be back for more. Thank you!
-- Eric Kvenzel, Rapid City, SD
September 22-23, 2001 Rapid City, SD
The class was well worth the travel.
--Claude Sandoval, Tsaile, AZ
This class is a great explanation and overview, or great reinforcement of what you already know. Mike Holt's book is a great back up also. Your material combined with prep book is a great system.
--Andrea Hussey, Gillette, WY
*********************************
July 21-22, 2001 Rapid City, SD
If you don't understand calculations very well, this is what you need to learn how to calculate them.
--Shawn Cummings, Rapid City, SD
**************************************
June 9-10, 2001 Sioux Falls, SD
The course really gives you a good lesson finding your way around the code book.
--John Mantel, Hull, IA
The class gave me a very good overview on problems that don't always occur in everyday situations
--Patricia Loosbrock, Sioux Falls, SD
I had to come a long way to take this class, but I'm glad I did.
--Gary Sambo, Wasilla, AK
The class will help to know how to use and understand the tables
--Glen Mantel, Door, IA
***********************************
April 7-8, 2001 Gillette, WY
This was a very knowledgeable and interesting class
--Bill Willenbrech, Lander, WY
*****************************************
March 17-18, 2001 Rapid City, SD
This class gave me the courage to take the exam. I feel I have a better understanding of a lot of things.
--Christina Durr, Nisland, SD
Steve's classes are some of the best you can take if you need code hours but also want to learn!
--Ron Conrad, Rapid City, SD
******************************************
July 22-23, 2000 Rapid City, SD
If you are not just filling in your required hours and want to learn something, this seminar is for you. I came, I saw, I got more than just my hours, I got knowledge. I've been to numerous continuing education classes and left with the hours I've needed but also left without feeling I've accomplished anything; or even left confused! But with the Steve Arne ElctroTech Seminars, I left not only with the needed hours, but also understanding and refreshed with those many calculations that you've got over the year. Also the confidence to do them on my own out in the field. Speaking from experience, with other continuing education seminars, I can say I'll wait until Arne Electro-Tech is having a class at a time and area that is convenient for me to go.
--Chad Baribeau, Wolsey, SD
**********************************************
June 17-18, 2000, Sioux Falls, SD
It is a good refresher course for Journeyman and it helps apprentices who don't have any schooling. Steve did a good job keeping everyone involved with the seminar and was very knowledgeable with questions asked.
--Luke Schulte, Sioux Falls, SD
***********************************************
April 8-9, 2000, Chamberlain, SD
SD Electrical Commission requested this course to me since I will be taking my exam. They said that this is one of the best courses in Exam Prep.
Bryon D. Eaton, Redfield, SD
**********************************************
January 22-23, 2000, Rapid City, SD
I think your class was excellent "a must for all people preparing for the exam."
--John "Bryce" Stanley, Douglas, WY
**********************************************
April 10-11, 1999, Rapid City, SD
The class is well worth the time spent. Classes are well organized. Steve has the best quality of learning materials known of in South Dakota
--Tim Keller, Rapid City, SD
*******************************************
May 2-3, 1998, Mitchell, SD
The course was well worth taking for me. It helped answer some of the questions I had about the code.
--Carl Shaffner, Spearfish, SD
*********************************************
April 18-19, 1998, Spearfish, SD
Very good class with knowledgeable and personable instructor. Would be a real good class for someone preparing to that state exams.
--Jim Barker, Lusk, WY
I would encourage anyone to attend this course. Allot of topics are presented more clearly than other classes I have attended. I can honestly say I enjoyed the class
--Ron Caylor, Moorcroft, WY
***************************************
January 17-18, 1998, Rapid City, SD
The class really helped me get in touch with the NEC Code book. It will really help me with taking my Journeyman's test.
--Jeremy Kucera, Winner, SD
This class shed light on the dark areas of the code. Time spent here was very worthwhile and I know it will help allot when taking my Journeyman's test. Thanks.
--Larry Martin, Custer, SD
Thanks for restoring my faith in the continuing education program. For the first time, I feel it worth my time to sit through 16 hours of class. Thanks again.
--Ron Conrad, Rapid City
desktop site